Disconnectlocalvolume; Discovertcp - HP StoreVirtual 4000 User Manual

userName
passWord
groupName
volumeName
Example
cliq deleteVolume volumeName=MyVolume login=10.1.2.3 userName=admin
passWord=secret
cliq deleteVolume volumeName=MyVolume

disconnectLocalVolume

This command disconnects a SAN volume from the host. This command is only supported for iSCSI.
Availability: Windows
Version: 8.0
Request Syntax
cliq disconnectLocalVolume volumeName=
volumeName
Example
cliq disconnectLocalVolume volumeName=z:

discoverTcp

This command discovers storage systems and management groups on the network, using TCP.
Availability: Windows, SAN/iQ
Version: 8.0
Request Syntax
cliq discoverTCP groupOrder= node=
groupOrder
receivePort
waitForData
48 | HP Lefthand CLI | Commands
Conditional The authentication user name for the storage system. (Parameters
userName/passWord or groupName must be specified).
Conditional The password for the storage system. (Parameters userName/passWord
or groupName must be specified).
Conditional The name of the management group with cached credentials.
(Parameters userName/passWord or groupName must be specified).
Required The name of the volume
Required The name of the volume
node Required The delimited list of node names or IP addresses, or DNS-resolvable
node names of the storage systems the cluster comprises.
Optional Return storage systems ordered by group membership. This can be one
of: 0 - default, 1
Optional The TCP port to receive the discovery packets (defaults to an unused
port if unspecified)
Optional The number of milliseconds to wait for the discovery packets (defaults to
3000 if unspecified)