Brocade Communications Systems StoreFabric SN6500B Installation Manual page 91

TABLE 35
Port usage and firewall requirements (Continued)
Port Number Ports
2
80 Management application HTTP server
1
80 Product HTTP server
2
161 SNMP port
2
162 SNMP Trap port
2
389 LDAP Authentication Server Port
1,2
443 HTTPS server
2
443
443
2
443
2
465 SMTP Server port for SSL
2
514 Syslog Port
2
636 LDAP Authentication SSL port
Network Advisor Installation and Migration Guide
53-1002699-01
Management server and client ports
Transport Description
TCP Non-SSL HTTP/1.1 connector
port if you use secure
client-server communication.
You need this port for HTTP
redirection
TCP Product non-SSL http port for
http and CAL communication if
you do not use secure
communication to the product
Product non-SSL http port for
http and CAL communication if
you do not use secure
communication to the product
and you do not use the
Management application
server proxy
UDP Default SNMP port
UDP Default SNMP trap port
UDP LDAP server port for
authentication if you use LDAP
TCP
as an external authentication
TCP HTTPS (HTTP over SSL) server
port if you use secure client -
server communication
HTTPS (HTTP over SSL) server
port if you use secure
communication to the product
HTTPS (HTTP over SSL) server
port if you use secure
communication to the product
and you do not use the
Management application
server proxy
HTTPS (HTTP over SSL) server
port if you use vCenter
discovery
TCP SMTP Server port for e-mail
communication if you use
e-mail notifications with SSL
UDP Default Syslog Port
TCP LDAP server port for
authentication if you use LDAP
as an external authentication
and SSL is enabled
Communication Path Open in Firewall
Client–Server Yes
Server–Product Yes
Client–Product Yes
Server–Product Yes
Product-Server Yes
Server–LDAP Yes
Server
Client-Server Yes
Server–Product Yes
Client–Product Yes
Server-vCenter Yes
Server
Server-SMTP Yes
Server
Product–Server Yes
Managed Host -
Server
Server–LDAP Yes
Server
A
71