HP StorageWorks XP48 - Disk Array Configuration Manual page 18

16
Fabric and Connection parameter settings
You can set each array port to FABRIC ON or OFF with connections of
POINT-TO-POINT or FC-AL as shown in the following table and figures.
For detailed topology information, refer to the HP StorageWorks SAN
Design Reference Guide on the
Fabric Connection
Parameter Parameter
ON FC-AL
ON Point-to-Point
OFF FC-AL
OFF Point-to-Point
HP StorageWorks Disk Array XP Operating System Configuration Guide: DYNIX/ptx
hp.com
website.
Provides
Not supported
N-port (SAN fabric port)
Not supported
Not supported