Features And Requirements - HP StorageWorks XP48 - Disk Array Configuration Manual

Features and requirements

10
The disk array and host have the following features and requirements.
• HP StorageWorks disk arrays:
XP48: Up to 48 drives from 72 GB to 8.7 TB, 24 FC ports
XP128: From 8 to 128 drives for up to 18 TB, 48 FC ports
XP512: Up to 512 drives from 72 GB to 93 TB, 48 FC ports
XP1024: From 8 to 1024 drives for up to 149 TB, 64 FC ports
• IBM NUMA-Q series enterprise system
• DYNIX/ptx operating system
• Host Bus Adapters (HBAs): Install adapters and all utilities and
drivers. Refer to the adapter documentation for installation details.
• (Recommended) HP StorageWorks Command View XP with LUN
management feature or Remote Control with the LUN Configuration
Manager XP option for configuring disk array ports and paths.
• (Recommended) HP StorageWorks Secure Manager XP: Allows the
host to access only array devices for which it is authorized.
• Other available XP Software (some may not apply to your system):
HP StorageWorks Business Copy XP
HP StorageWorks Continuous Access XP
HP StorageWorks Continuous Access Extension XP
HP StorageWorks Auto LUN XP
HP StorageWorks Data Exchange XP
HP StorageWorks Resource Manager XP
HP StorageWorks RAID Manager XP
HP StorageWorks Cache LUN XP
HP StorageWorks Auto Path XP
HP StorageWorks Cluster Extension XP
HP StorageWorks Performance Advisor XP software
HP StorageWorks Disk Array XP Operating System Configuration Guide: DYNIX/ptx