Verifying Disk Array Device Recognition - HP StorageWorks XP48 - Disk Array Configuration Manual

Verifying disk array device recognition

Installation
Verify that the host recognizes the disk array devices:
1. Log into the host as an administrator (root).
2. Check the list of peripherals on the host to verify the host recognizes all
disk array devices. If any devices are missing, check disk array path
configuration, check host HBA configuration, and check cables.
3. Record the disk numbers and other device information on the worksheet
in Appendix A. You will need the disk numbers when you format,
partition, and mount the disks.
23