Configuring Srm To Communicate With Xp Virtualization Adapter - HP StorageWorks XP10000 - Disk Array Administrator's Manual

Configuring SRM to communicate with XP Virtualization Adapter

To configure SRM to communicate with XP Virtualization Adapter, complete the following steps:
1. Configure Array Manager
When the protected and recovery SRM servers have been paired, click Configure to configure
Array Manager to use XP Virtualization Adapter.
2. Add XP Virtualization Adapter to SRM on the protected site
From the Configure Array Managers window, click Add to add connection information for the
XP Virtualization Adapter.
If the SRM and XP Virtualization Adapter are using a remote connection
Select the XP Virtualization Adapter from the Manager Type that is connected to XP Virtu-
alization Adapter.
Enter the Alias to connect to XP RAID Manager instance via XP Virtualization.
28 Configuring SRM and the XP disk array