Configuration - HP StorageWorks X5000 Release Note

Description
Workaround Access the Distributed File System Properties page, update the default DFS
Issue:
FAT and FAT32 volumes are not displayed on the Volumes main page
Description
Workaround Because the Disks > Volumes main page of the WebUI can only manage NTFS
Issue:
Storage Manager not localized in the WebUI
Description
Workaround Perform the following steps:
Issue:
Array Configuration Utility in the WebUI fails to start
Description
Workaround Terminal service into the device, and start the ACU setup from the local desktop
Configuration
This section provides additional information on configuring your storage server.
Issue:
An unknown PCI serial port device can be seen in Windows Device Manager
Description
Workaround Reboot the system, press F9 during boot to enter the RBSU, open the Advanced
Issue:
Replacement drive does not remirror data drive
20
Storage server Web User Interface
If a DFS root is created and enabled by default on shares, and then re-created
later under a new name, the File Share page does not update the DFS local root
information and attempts to create DFS entries under the old name.
information, and then click OK. The File Share page now contains the proper
DFS information.
FAT and FAT32 volumes are not displayed on the Volumes main page.
volumes, the page only displays NTFS volumes.
Storage Manager is not localized in the WebUI when the language is changed to
Japanese. String IDs appear where the localized strings should be after Japanese
is selected.
1. Access Add or Remove Programs located in the Control Panel. Uninstall the
following applications:
a. KB840141
b. Storage Manager
2.
Reboot.
3.
Navigate to c:\hpnas\components\storagemanager.
4. Install Storage Manager with English and Japanese selected.
5. Install KB840141.
When accessing the WebUI Array Configuration Utility (ACU) from the Array
Management page, the ACU fails to start correctly.
(Start > Programs > HP System Tools > HP Array Configuration Utility > Setup HP
Array Configuration Utility). A dialog box is displayed that asks you to select
an Execution Mode. Choose Remote Service Mode. The ACU is now available
from within the WebUI.
Configuration
On the ML310 G3 storage server, if the optional serial port is enabled, a PCI
serial port can show up as an unknown device.
Options, choose the Erase Non-volatile Memory option, and confirm the erase.
This sets the BIOS back to factory defaults.