Other Troubleshooting Tips; Forgotten Or Do Not Know The Access Point Name/Network Name (Ssid), Security; The Machine Is Not Detected After The Network Environment Is Changed; Reference Information - Canon PIXMA MG5220 Network Setup Manual

Other Troubleshooting Tips

Forgotten or Do Not Know the Access Point Name/Network Name
(SSID), Security Protocol (encryption standard), and Network Key
Check
Check the access point settings.
• For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.
The Machine is Not Detected after the Network Environment is
Changed
Check
Wait until the IP address is assigned to the computer. You may need to restart your
computer.
• Search for the machine again after confirming a valid IP address is assigned to the computer.
Glossary
• IP address
A numerical identification assigned to each computer or network device connected to a network.
0

Reference Information

Character Entry

Action
This machine allows you to enter characters when an on-screen keyboard is displayed.
Follow the procedure below.
C
D A E
B
1
When an on-screen keyboard shown above is displayed, press the center
FUNCTION button (A) to switch to a keyboard having characters you want to use.
• Four character sets are available: Upper-case alphabets, lower-case alphabets, numbers,
and symbols. Each time you press the center FUNCTION button, an on-screen keyboard is
switched among them.
2
Select a character on the on-screen keyboard using the { } [ ] buttons (B),
then press the OK button to enter it.
• Entered characters are displayed on the upper section (C) of the on-screen keyboard.
3
Repeat and to enter more characters.
4
After you enter all characters you need, press the left FUNCTION button (D).