Create And Start Failover Packages; Create File Volumes - HP StorageWorks NAS 8000 - Version 1.6.X Manual

Create and Start Failover Packages

1. Select Failover Packages.
2. Select Actions > Create New Package.
3. Define the settings for this Failover Package including name (maximum of 35 characters),
Figure 15: Failover Package Settings
4. As soon as you create a package, make a DNS entry for this package name and map it to
5. Select Actions > Start Selected Package to start the Failover Package.
Repeat steps 2 through 5 to create additional Failover Packages.

Create File Volumes

Before you create a new file volume, you must add the volume group to a failover package.
1. Select File Volume Summary.
2. Select Actions > Create New File Volume.
3. Assign a File Volume Name, then select Quota Management and Capacity Policy
4. Enter the Capacity of the file volume (in GB).
HP StorageWorks NAS 8000 SAN High Availability, Solution Integration Manual (SIM)
associated Volume Groups, and Virtual IP address(es).
the virtual IP address.
options.
Assign space to the volume using the information from the storage planning worksheet in.
Remember to leave space for planned snapshots.
Installation Guide
51