Deleting End-To-End Monitors - HP StorageWorks MSA 2/8 - SAN Switch User Manual

Using Advanced Performance Monitoring
Example 1. The following command displays all of the end-to-end monitors on
port 3 at an interval of every 6 seconds. (In this example, there are three monitors
on port 3, numbered 0, 1, and 2.)
Note:
stands for gigabytes, or "k" which stands for kilobytes.
Example 2. The following command displays the cumulative counters on all
end-to-end monitors defined on port 3. The KEY column contains the monitor
number.
switch:admin> perfShowEEMonitor 3
There are 3 end-to-end monitor(s) defined on port 3.
KEY SID
-----------------------------------------------------------------------...
0 0xb1300
1 0xb1200
2 0x58e0f

Deleting End-to-end Monitors

Use the perfDelEEMonitor command to delete an end-to-end monitor on a
port. Indicate which monitor to delete by specifying the monitor number that was
returned by a previous perfDelEEMonitor command.
44
sw1:admin> perfShowEEMonitor 3, 5
perfShowEEMonitor 3, 5: Tx/Rx are # of bytes and crc is
# of crc errors
0
------------ ------------
crc Tx Rx crc
============ ============
0 0 0 0
0 53m 4.9m 0
0 53m 4.4m 0
0 53m 4.8m 0
0 53m 4.6m 0
0 53m 5.0m 0
0 52m 4.6m 0
In the example above, "m" stands for megabytes. You may also see "g" which
DID OWNER_APP
0xb23ef TELNET
0xb22ef TELNET
0x1182ef WEB_TOOLS
Advanced Performance Monitoring Version 3.1.x/4.1.x User Guide
1 2
------------
Tx Rx crc Tx
============
0 0 0 0
53m 4.9m 0 53m 4.9m
53m 4.4m 0 53m 4.4m
53m 4.8m 0 53m 4.8m
53m 4.6m 0 53m 4.6m
53m 5.0m 0 53m 5.0m
52m 4.6m 0 52m 4.6m
OWNER_IP_ADDR
N/A
N/A
192.168.169.40
Rx
0
TX_COUNT
0x00000004d0ba9915 ...
0x00000004d0baa754 ...
0x00000004d0bade54 ...
...