HP StorageWorks MSA 2/8 - SAN Switch User Manual page 49

Example 1. The following command displays filter monitor traffic on port 2 at an
interval of once every 5 seconds. In the command output, "#CMDs" refers to the
read, write, and read-write counters, and "#Frames" refers to SCSI frame, IP
frame, and user-defined counters.
Example 2. The following command displays the cumulative frame count of all
filter-based monitors defined on port 2. The KEY column lists the monitor
numbers.
Advanced Performance Monitoring Version 3.1.x/4.1.x User Guide
sw1:admin> perfShowFilterMonitor 2, 5
0 1
#CMDs #CMDs
-------------------------------------------------------------
0 0
26k 187
26k 177
26k 184
26k 182
26k 188
sw1:admin> perfShowFilterMonitor 2
There are 7 filter-based monitors defined on port 2.
KEY ALIAS OWNER_APP
-------------------------------------------------------------
0 SCSI Read TELNET
1 SCSI Write TELNET
2 SCSI R/W TELNET
3 SCSI Frame WEB_TOOLS
4 IP Frame WEB_TOOLS
5 FCP/IP WEB_TOOLS
6 SCSI_RD WEB_TOOLS
Using Advanced Performance Monitoring
2 3
#CMDs #Frames
0 0
681 682
711 710
734 734
649 649
754 755
OWNER_IP_ADDR
N/A
N/A
N/A
192.168.169.40
192.168.169.40
192.168.169.40
192.168.161.140
4 5
#Frames #Frames
0 0
682 494
710 534
734 550
649 467
755 567
FRAME_COUNT
0x0000000000002208
0x000000000000464a
0x000000000000fd8c
0x00000000002c2229
0x0000000000000492
0x0000000000000009
0x000000000000023a
6
#CMDs
0
187
176
184
182
184
49