Lexmark X746 User Manual page 53

Additional printer setup
For Windows users
1
Insert the Software and Documentation CD.
If the installation screen does not appear after a minute, then launch the CD manually:
a
Click , or click Start and then click Run.
b
In the Start Search or Run dialog, type D:\setup.exe, where D is the letter of the CD or DVD drive.
c
Press Enter, or click OK.
2
Click Install, and then follow the instructions on the computer screen.
Note: To configure the printer using a static IP address, IPv6, or scripts, select Advanced Options >
Administrator Tools.
3
Select Ethernet connection, and then click Continue.
4
Attach the appropriate cable to the computer and to the printer when instructed to do so.
5
Select the printer from the list, and then click Continue.
Note: If the configured printer does not appear on the list, then click Modify Search.
6
Follow the instructions on the computer screen.
For Macintosh users
1
Allow the network DHCP server to assign an IP address to the printer.
2
Obtain the printer IP address:
•
From the printer home screen
• From the TCP/IP section in the Network/Ports menu
•
By printing a network setup page or menu settings page, and then finding the TCP/IP section
Note: You will need the IP address if you are configuring access for computers on a different subnet than the printer.
3
Install the printer drivers, and then add the printer.
a
Install a printer driver file on the computer:
1
Insert the Software and Documentation CD, and then double‑click the installer package for the printer.
2
Follow the instructions on the computer screen.
3
Select a destination, and then click Continue.
4
From the Easy Install screen, click Install.
5
Type the user password, and then click OK.
All the necessary applications are installed in the computer.
6
Click Close when installation is complete.
b
Add the printer:
• For IP printing:
In Mac OS X version 10.5 or later
1
From the Apple menu, navigate to:
System Preferences > Print & Fax
2
Click +, and then click the IP tab.
3
Type the printer IP address in the address field, and then click Add.
53