Lexmark X746 Copy Manual

Copy guide
Note: You can load paper sizes in short‑edge‑first orientation. For more information, see the "Supported paper sizes, types,
and weights" section in the User's Guide.

Making a quick copy

1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Notes:
•
When loading a document into the ADF, adjust the paper guides.
• Make sure the size of the original document and the copy paper size are the same. Failure to set the proper size may
result in a cropped image.
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
From the printer control panel, press

Copying using the ADF

1
Load an original document faceup, short edge first into the ADF.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy > change the copy settings > Copy It

Copying using the scanner glass

1
Place an original document facedown on the scanner glass in the upper left corner.
2
From the home screen, navigate to:
Copy > change the copy settings > Copy It
3
If you have more pages to scan, then place the next document on the scanner glass, and then touch Scan the Next Page.
4
Touch Finish the Job to return to the home screen.

Understanding the copy options

Copy from

This option opens a screen where you can enter the paper size of the original document.
•
Touch a paper size that matches the original document.
•
Touch Mixed Sizes to copy an original document that contains mixed paper sizes with the same width.
•
Touch Auto Size Sense to allow the scanner to automatically determine the size of the original document.
to start copying.
Copy guide
Page 1 of 4