Lexmark X746 User Manual page 183

Understanding the printer menus
Use
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
Best for content
0–5
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Scan edge to edge
Off
On
Sharpness
0–5
Temperature
‑4 to 4
Enable Color Fax Scans
Off by default
On by default
Never use
Always use
Auto Convert Color Faxes to Mono
Faxes
On
Off
To
Specify which color to drop, and how much to increase or decrease the dropout.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specify the contrast in the scanned image.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible.
Note: 0 is the factory default setting.
Specify if the original document is scanned edge-to‑edge prior to faxing.
Note: Off is the factory default setting.
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
Enable the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
Enable color faxing.
Note: "Off by default" is the factory default setting.
Convert all outgoing faxes to black and white.
Note: On is the factory default setting.
183