Network Card Menu - Lexmark X746 User Manual

Understanding the printer menus
Reports menu
To access the menu, navigate to any of the following:
•
Network/Ports menu > Networks/Ports > Standard Network > Standard Network Setup > Reports
• Network/Ports menu > Networks/Ports > Network [x] > Network [x] Setup > Reports
Use To
Print Setup Page Print a report containing information about the network printer settings, such as the TCP/IP address.

Network Card menu

To access the menu, navigate to any of the following:
• Network/Ports menu > Network/Ports > Standard Network > Standard Network Setup > Network Card
•
Network/Ports menu > Network/Ports > Network [x] > Network [x] Setup > Network Card
Use
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0, 10–255 seconds
Banner Page
Off
On
TCP/IP menu
Note: This menu is available only in network models or printers attached to print servers.
To access the menu, navigate to any of the following:
• Network/Ports > Standard Network > Standard Network Setup >TCP/IP
•
Network/Ports > Network [x] > Network [x] Setup >TCP/IP
Use
Activate
On
Off
To
View the connection status of the network card.
View the speed of an active network card.
View the network addresses.
Set the amount of time it takes for a network print job to be canceled.
Notes:
•
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
• If a value of 1–9 is selected, then the setting is saved as 10.
Allow the printer to print a banner page.
Note: Off is the factory default setting.
To
Activate or deactivate TCP/IP.
Note: On is the factory default setting.
148