Ifyour printer iscompatible
with PictBridge,
still
images
can be printed
easily by connecting
the
camera
directly to the printer with the USB cable.
DPOF setting can also be used. (: • pg. 45)
Preparation:
• Set the power switch
to _.
• Set the MODE
switch to O.
MENU
6
Press /-,/v
to select menus and
press </>
to select settings,
• [NUMBER
OF PRINTS]:
The number of prints can be set from 1 to
99.
• [DATE]:
Set whether to print the date and time,
7
Select
[PRINT].
2 Select [DIRECT PRINT].
• [PLEASE CONNECT PRINTER] appears,
3
Connect
the camera to the printer
with the USB cable.
• After a while, the print menu appears,
To stop
printing
after printing
starts
1) Press I_11
2) Press
.-'../v
to select
[EXECUTE],
then
press I_11.
NOTE:
If the printer is not recognized,
or to print again
after direct printing with a PictBridge printer,
remove the USB cable, select [DIRECT
PRINT]
in the menu again, and then reconnect the cable.
4
Select [SELECTED
PRINT].
5 Select the desired Image.
If the printer is compatible with DPOF, you can
use the DPOF settings. (
pg. 45)
After performing step 1-3
4
Select and set items as follows.
[DPOF PRINT] _- [PRINT]
• To confirm the DPOF setting, press
A/v
to select [CHECK SETTINGS],
then press
1_11. After that, press MENU to return to the
previous menu.