Table of Contents
Advertisement
Menus
Settings([
] = Factory-preset)
AE
(Manual
Exposure)
Adjusts
the brightness.
AF
(Manual
Focus)
Adjusts
the focus.
For video recording
[AUTO]: The brightness is adjusted automatically.
-6 to +6: Corrects the brightness within this range in increments of 1.
Use </>
to set the value.
For still image recording
[--.0]:The brightness is not adjusted.
-2.0 to +2.0 (EV): Corrects the brightness within this range in
increments of 1/3EV. Use </>
to set the value.
To lock the exposure
When the menu disappears after you finish configuring the setting,
press and hold I_11 for more than 2 seconds. The _ indicator appears.
[AUTO]: The focus is adjusted automatically.
4 _ _
: Adjusts the focus manually. Use </>
to set the focus.
(When zooming, the subject will not go out of focus if you adjust the
focus at the telephoto (T) side before zooming to the wide-angle (W)
side.)
WB
(White Balance)
Adjusts the white
balance to achieve the
optimum colors for the
amount of light in your
surroundings during
recording.
[AUTO]:
White balance
is adjusted
automatically,
h"_ MWB: Adjusts
the white balance
manually
depending
on the light
source.
1) Hold a sheet of plain white paper
in front of the subject.
Adjust the
paper
zoom, or position
yourself so that
the white paper fills the screen.
2) Press and hold I_11 until the I_
indicator
starts
blinking
then
stops blinking.
-:.o:-FINE: When
shooting
outdoors
on a sunny
day,
CLOUD:
When
shooting
outdoors
on a cloudy
day,
HALOGEN:
When
a video light or similar
type of lighting
is used.
CONTINUED O NNEXT PAGE
Advertisement
Table of Contents
