Table of Contents
Advertisement
Check which
buttons
to use in the illustration
of
"Controls
in this section"
on page 12.
Open the pad and make grip adjustments.
You can check the remaining
battery
power and
the recordable
time.
When
the battery
is attached
|
Set the power
switch
to OFF.
Slide while pressing
down the lock button.
f
i
Playback
Recording
Lock button
INDEX
tripod stud, and the
mounting
socket
with the screw, and
then rotate the
camera clockwise to
mount it to the
tripod.
NOTE:
Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious
damage to the camera.
NOTES:
i Battery information
is displayed for approx. 3
seconds if the button is pressed and released
quickly, and for approx. 15 seconds if the button
is pressed and held for several seconds.
If COMMUNICATING
ERROR" appears
instead of the battery status even though you
tried to press c_ several times, there may be a
problem with your battery. In such a case,
consult your nearest JVC dealer.
• The recordable time display should only be
used as a guide. It is displayed in 10 minute
units.
Advertisement
Table of Contents
