Table of Contents
Advertisement
Preparation:
Open the LCD monitor.
(pg. 10)
Set the power switch to ro_.
Slide while
pressing
down the lock
button.
Lock button
Set the MODE switch to O.
MODE
I_
: Video
mode
O
: Still
image
mode
• The camera is programmed to record still
images on the built-in hard disk when it is
shipped from the factory. To change the
recording medium, see page 15.
Zoom
Lever
LIGHT/INFO
Press the REC/SNAP button
to start recording.
The PHOTO indicator
appears
during
recording.
• To check how the image looks before
recording,
press the REC/SNAP
button
halfway and hold. The _
indicator
appears and becomes green when the
captured image is focused. To cancel the
recording,
release the REC/SNAP
button.
To record it on the recording medium,
press the REC/SNAP
button fully.
To change
the picture
quality
(
- pg. 55)
NOTES:
• Still images are recorded at 4:3 mode. They cannot be recorded
at 169 mode.
• If the camera is not operated during recording or playback for 5 minutes when using the battery pack, it
turns itself off automatically
to conserve
power. To turn the camera on again, set the power switch to
OFF, then to _i
or _.
When using the AC adapter, the camera enters the sleep mode (the access
lamp lights and the LCD monitor turns off). To cancel the sleep mode, perform any operation such as
zooming.
Advertisement
Table of Contents
