General Cleaning - IKEA ELECTRIC RANGE Use & Care Manual

Hide thumbs Also See for ELECTRIC RANGE:
Table of Contents

Advertisement

Available languages

Available languages

To Delay Start Self-Clean:
Before delay starting Self-Clean, make sure the door is closed
completely or it will not lock and the cycle will not begin.
1. Press DELAY.
"DELAY" flashes and "00:00" will appear in the display.
2. Press the "up" or "down" arrow pads to enter the amount of
time you want to delay the cycle. Delay time can be set from
10 minutes (00:10) to 11 hours and 59 minutes (11:59).
3. While "DELAY" is flashing, press the CLEAN pad. "CLEAN"
will flash in the display.
4. Press the "up" or "down" arrow pad.
CL-M (Clean - Medium soil, 3 hours) appears in the display.
5. To choose a clean setting other then Medium, press the "up"
or "down" arrow pads to scroll through the self-cleaning
settings.
CL-H (Clean - Heavy soil, 4 hours)
CL-M (Clean - Medium soil, 3 hours)
CL-L (Clean - Light soil, 2 hours)
Choosing a cleaning level automatically
programs the self-
cleaning time.
After 4 seconds, "CLEAN," "DELAY," and "LOCK" will appear
in the display to show that the oven is set for a delayed clean
operation. The delay time is displayed.
To change the delay self-clean time:
1. Press DELAY.
"DELAY" flashes and "00:00" will appear in the display.
2. Press the "up" or "down" arrow pads to enter the amount of
time you want to delay the cycle.
After 4 seconds, "CLEAN," "DELAY," and "LOCK" will appear
in the display to show that the oven is set for a delayed clean
operation. The delay time is displayed.
When the self-clean cycle starts:
"DELAY" will turn off and the clean time will appear in the display.
To Stop Self-Clean
Anytime:
Press CANCEL. All words disappear from the display. All
functions are canceled. The time of day appears in the display.
Depending on the actual oven temperature when self-clean is
canceled, the oven door may remain locked until the oven cools.
IMPORTANT:
Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR
PORCELAIN
ENAMEL SURFACES
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire range is cool. These spills may
affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad:
Gently clean around the model and serial number plate
because scrubbing may remove numbers.
All-Purpose Appliance Cleaner Part Number 31682 (not
included):
See "Assistance
or Service" section to order.
STAINLESS
STEEL (on some models)
Cleaning Method:
Rub in direction of grain to avoid damaging.
Stainless Steel Cleaner and Polish Part Number 31462 (not
included):
See "Assistance
or Service" section to order.
Liquid detergent or all-purpose
cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
To avoid damage to stainless steel, do not use soap-filled
scouring pads, abrasive cleaners, Cooktop Polishing Creme,
steel-wool pads, gritty washcloths
or abrasive paper towels.
CERAMIC
GLASS (on some models)
Cleaning Method:
Always wipe with a clean, wet cloth or sponge and dry thoroughly
to avoid streaking and staining.
Cooktop Cleaner Part Number 31464 is recommended
regularly
to help avoid scratches,
pitting and abrasions and to condition
the cooktop, and can be ordered as an accessory. See
"Assistance
or Service" section to order.
Cooktop Scraper Part Number WA906B is also recommended
for
stubborn soils, and can be ordered as an accessory. See
"Assistance
or Service" section to order. The Cooktop Scraper
uses razor blades. Store razor blades out of the reach of children.
Light to moderate
soil
Paper towels or clean damp sponge
Sugary spills (jellies, candy, syrup)
Cooktop Scraper:
Scrape off sugary spills while the cooktop is still warm. You
may want to wear oven mitts while cleaning the cooktop.
Cooktop Polishing Creme and clean damp paper towel:
Clean as soon as cooktop has cooled down. Rub creme into
surface with a damp paper towel or soft cloth. Continue
rubbing until white film disappears.
13

Advertisement

Table of Contents
loading

Table of Contents