Image 10.6 Owner's Manual page 19

Do not press the AGE;.
SETdecrease I _mo.,o&
to the letter "C," for aS
€orded pulse ;ensor. '
The setting can be changed back by pmaslng the
button agaln.
To exit the information mode, remove the key'.
HOW TO ADJUST THe A"Gu orTHe- CONSOLe
In orderlor the console to receive signals from.the .....
pulse sensor, the console must be angled toward the
pulse sensor. Loosen the knobs on the ends of the
console crossbar, rotate the console to the proper.
angle, and retighten the knobs.
HOW TO ADJUST THE CUSHION LEVEL
• The rear legs of the treadmill are designed to cushion
the impact as you walk or run on the treadmill. The
legs can be e_us'ted for a firmer or softer cushion
level using the knob on the dght side of the treadmill.
Knob
For a firmer cushion level, turn the knob dock'wise; for
a softer cushion level, turn the knob counterclockwise.
Note: The faster you run on the treadmill, the firmer
the cushion level should be. If the cushion level is too
soft, the treadmill will bounce excessively.