Nikon COOLPIX L12 User Manual page 80

Connecting the Camera and Printer
1
Set the USB option (PII_ 64) to [PTP], _ USB
2 Turn the camera off,
Fh
o
&
"4
Fh
0
3
O_
P_
68
3 Turn the printer on.
• Check printer settings.
4 Connect the USB cable as shown below,
5 Turn the camera on,
• When connected correctly, thePictBridge start-up
screen (_ will be displayed in the camera monitor ....... _o ........
Then the print selection screen will be displayed @.
Connecting the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly Do not
use folce when connecting the USB cable When disconnecting the USB cable, do not pull
the connector at an angle
• Do not pinch the connector cover between the camela's USB connector and the USB cable
connector when connecting the cable to the camera