Nikon COOLPIX L12 User Manual page 77

Transferring Pictures to a Computer
1
Turn on a computer to which PictureProject has been installed,
2 Turn the camera off and connect the USB cable as shown below.
I
._ Turn the camera on.
• At default PictureProject settings, PictureProject
Transfer is launched immediately with recognition
of camera connection.
4
Transfer pictures and movies.
• Transfer using PictureProject
Click [Transfer] in PictureProject Transfer.
All pictures and movies marked for transfer are copied to the computer. Once
transfer is complete, pictures are displayed in PictureProject.
• Transfer using _'_ (0) on the camera
While PictureProject Transfer is launched, press _x_ (_)) on the camera to copy
pictures marked for transfer (PI_ 66) to the computer. The following messages
are displayed in the camera monitor during transfer.
computer.
Connecting
the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly Do not
use force when connecting the USB cable Wher_ disconnecting the USB cable, do not pull
the connector at an angle
• Do not pinch the connector cove/between the camela's USB connector and the USB cable
connector when connecting the cable to the camera
• Connection may not be recognized when the camera is connected to a computer via a USB
hub
A
0
8"
6"
A
&
65