Nikon COOLPIX L12 User Manual page 75

Use the supplied USB cable to connect the camera to a computer, and copy
(transfer) pictures to a computer with the supplied PictureProject software.
Before Connecting the Camera
Installing PictureProject
Before transferring pictures or movies to a computer, PictureProject must be
installed. For more information on installing and using PictureProject, see the
Quick Start Guide.
Confirming USB Option
The following two methods can be used to transfer pictures from the camera
to a computer:
• Press _ (_)) on the camera.
• Click [Transfer] in PictureProject.
The method used will depend on your computer's operating system and the
USB option selected in the camera's setup menu.
Operating system 1
Windows Vista 32-bit HomeBasJd
-tomePremtumlBusJness/Enter-
"_se/Ult_mate editions
USB mode 2
camera 3 [Transfer] in PicturePr0Ject
Choose [Mass
storage]. Choose [PTP] or ]Mass storage]
Windows XP Home Ed_tlon
Windows XP Professiona Choose [PTP] or [Mass storage].
Windows 2000 Professional 4 Choose [Mass storage].
Mac OS X 10.3.9, 10.4a,, Choose [PTP]. Choose [PTP] or
[Mass storage].
1 This camera supports the USB options, [PTP] (default sett ng) and ]Mass storage]
2 The camera's _ (_.x?) button cannot be used to transfer p ctures in the to lowing cases
Use [Transfer] in PktureProject.
• When transferring pictures from the camera's internal memory and [Mass storage] s
selected n the [USB] menu
• When the memory card write protect switch s in the "lock" posihon Unlock by slid lag
the switch to the "write" position before transferring pictures
3 If your computer Is running W ndows 2000 Professional, be sure to set the USB option to
]Mass storage] If [PTP] is selected, the Found New Hardware W zard wil be d splayed
when the camera is connected to the computer Select [Cancel], close the window, and
disconnect the camera from the computer
4 Refer to the Nikon webslte for the latest information on ope/ating system compat bi ity
(h
o
<
(h
o
o.
63