Table of Contents
Advertisement
Phone Book
The handset can store up to 50 names and phone numbers in its phone book. You
can make a call by selecting a name or number from the phone book, and copy
phone book items from one handset to another (p. 39, 40).
Storing Names and Numbers
1
Press the soft key (I;;_).
• The display will show the number of stored items.
2
3
I]
4
5
6
Press the soft key (Ir_!-il_).
Enter a name of up to 16 characters
with the
dialing buttons
([0] to [9]) (p. 35), then press
[V].
• To move the cursor, press the soft key (O)
or
• If a name is not required, press IV] then go to
step 4.
Enter a phone
number
of up to 32 digits.
• To delete a digit, press the soft key (r_F--BTi).
To erase all of the digits, press and hold the soft
key (Ir41r-_B_).
Press
[V].
• If you want to change the name, press the soft
key (Ir--I-iTi). The display returns to step 3.
Change the name.
• If you want to change the number, press [A,].
The display returns to step 4. Change the
number.
Press the soft key (Ik'_-=ll).
• To continue storing other items, repeat from step 2.
V:Next
7
Press [OFF].
• If a pause is required when dialing, press the soft key (IF2_L'_II)in step 4. A pause
is stored in a phone number as one digit (p. 55).
• To store numbers for calling card access (see "Chain Dial" on page 37), we
recommend you add pauses after each item. Storing pauses with numbers will
prevent misdialing (p. 55). The delay time necessary will depend on your
telephone company.
34
Advertisement
Table of Contents
