Table of Contents
Advertisement
Programmable Settings
Display Language
You can select either "English" or "Spanish" as the display language. The factory
preset is "English".
1
Press [MENU].
2
Scroll to "Znitial
setting"
by pressing
IV] or [A], then press the soft key (_'_l!--.r_).
3 Scroll to "change
language"
by pressing
IV] or [A], then press the soft key (_'_l!--.r_).
4 To change from English to Spanish, press the
soft key (I'*'_F_).
To change from Spanish to English, press the
soft key (_).
• The display changes to the selected language.
• You can also select the display language by
pressing IV] or [A].
5
When Spanish is selected, press the soft key (_),
then press [OFF].
When English is selected, press the soft key (Ik'4r_=JI), then press [OFF].
• If you select a language you cannot read, change the display language again
using direct commands (p. 63).
Dialing Mode
If you have touch tone service, set the dialing mode to "Tone". For rotary or pulse
service, set to "Pulse". The factory preset is "Tone".
1
Press [MENU].
2
Scroll to "Znitial
setting"
by pressing
IV] or [A], then press the soft key (_'_l!--.r_).
3 Scroll to "set
tel
line"
by pressing IV] or
[A], then press the soft key (IL'_III'-J_).
4 Press the soft key (_'_l!--.r_) a t "set
dial
mode".
5 Select "Puqse" or "Tone" by pressing [V] or
[A].
6 Press the soft key (Ik'_Vt-=ll), then press [OFF].
Initial
setting
Set tel line
Set dial mode
Set
dial
mode
:Tone
15
Advertisement
Table of Contents
