Table of Contents
Advertisement
AUTO PROGRAM
The AUTO PROGRAM feature allows you to place all channels with
a video signal intoCharmer Memory. When youpress the CHAN NEL
UP or DOWN button only those channels with a video signal will be
accessed.
NOTE: AIR/CABLE
Tuning
mode must be set properly
for your system.
CHANNEL
06
NOW
AUTOPROGRAM
IS
IN
PROGRESS
1. Press the ACTION button to display the MAIN MENU.
2. Press the CH UP/DOWN
and VOL LEFT/RIGHT
buttons to
highlight the SET UP Icon.
3. Press the ACTION button to display the SET UP Menu.
-SET
UP-
AIR/CABLE
AUTO
PROGRAM
MANUAL
PROGRAM
CLOCK
SET
PRESS
ACTION
TO
SET
4. Press the CH UP or DOWN button to highlight"AUTO PROGRAM".
5. Press the ACTION button to set and display the AUTO PROGRAM.
6. Press the VOL LEFT or RIGHT button to start AUTO PROGRAM
Scan. Channels will automatically
advance until all channels
have been scanned.
If the ACTION
button is pressed
while the AUTOPROGRAM
function is engaged, programming
will stop.
If two antennas are
connected, switch antenna inputs with the INPUT SELECT Menu
and repeat AUTO PROGRAM for the second antenna input. See
MANUAL PROGRAM to add or erase additional channels.
7. Press the ACTION button twice to Exit.
NOTE: Some channels with very weak signals may be
locked
into memory.
These must be deleted
manually using the MANUAL PROGRAM feature.
MANUAL
PROGRAM
Use this function after AUTOPROGRAM
to add or erase additional
channels. This feature allows you to select which channels are
placed into CHANNEL MEMORY so when you press the CHANNEL
UP or DOWN button only those channels
you desire will be
accessed.
1. Press the ACTION button to display the MAIN MENU.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to
highlight the SET UP Icon.
3. Press the ACTION button to display the SET UP Menu.
I
NOTE: Channel numbers with video signal present will be I
stored in CHANNEL MEMORY.
I
-SET
UP-
AIR/CABLE
AUTO
PROGRAM
MANUAL
PROGRAM
CLOCK
SET
PRESS
ACTION
TO
SET
-SET
UP-
AIR/CABLE
AUTO
PROGRAM
MANUAL
PROGRAM
CLOCK
SET
PRESS
ACTION
TO
SET
If ACTION button is pressed AUTO PROGRAM will automatically
store active TV Channels in CHANNEL MEMORY.
This will allow
you to skip over unused channels when using the CHANNEL UP or
DOWN buttons.
-41-
Advertisement
Table of Contents
