Table of Contents
Advertisement
Channel Caption Feature
ACTION
Displays and Exits Menus
Located On Remote Control
Highlight Desired
Feature When
Menu is Displayed
Selects or Adjusts
Features When
Menu is Displayed
Helpful Hints:
To select the desired channels for the Station Identifier feature
press two digits on the Remote Keyboard (Example: Press 0,
then 5 for channel 05). If cable channel over 100 is desired press
the three required digits on Remote Keyboard.
CHANNEL
CAPTION
(Station
Identifier)
The CHANNEL CAPTION (Station Identifier) allows you to input the
call names of up to 30 stations
into memory (using up to 4
characters). The call name will then display, along with the channel
number when changing channels or pressing RECALL.
1. Press the ACTION button to display the MAIN MENU.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to
highlight the CHANNEL CAPTION Icon.
3. Press the ACTION button to display the CHANNEL CAPTION
Menu.
-CHANNEL
CAPTION-
*
(CANCEL)
PRESS
ACTION
TO
EXIT
4. Press CH UP or DOWN buttons to select letters.
5. Press VOL LEFT or RIGHT buttons to change position.
6. Press the ACTION button twice to EXIT.
NOTE: Pressing the ACTION button again will return you
back to the CHANNEL CAPTION Icon.
NOTE: CHANNEL
CAPTION
will appear in the top left
corner of the screen.
Press CH UP/DOWN or the
number
buttons
to select
and label additional
channels.
The (*) represents a blank space. Select CANCEL
and press CH UP or DOWN button
to erase a
CHANNEL CAPTION.
CHANNEL CAPTION I
(Station Identifier)
ABC
03
/
-37-
Advertisement
Table of Contents
