Table of Contents
Advertisement
4. Press the CH UP or DOWN button to highlight "MANUAL
PROGRAM".
5. Press the ACTION button to display MANUAL PROG RAM Menu.
6. Select hours position by pressing CH UP button if necessary.
Press the VOL LEFT or RIGHT button to Set Hours (set AM/PM
accordingly).
VOL LEFT or RIGHT display numbers down and
up.
-MANUAL
PROGRAM-
CHANNEL
13
ADD
ERASE
PRESS
ACTION
TO
EXIT
Add or erase additional channels while still in CHANNEL MEMORY
using the number
buttons
and then add or erase using the
VOL LEFT or RIGHT buttons.
6. Use Remote Keyboard numbers (0 through 9) or CH UP/DOWN
buttons to select channels.
7. Press the VOL RIGHT button to add channel(s) to memory.
Press the VOL LEFT button to delete channel(s) from memory.
8. Repeat Steps 6 and 7 to continue adding or deleting channels.
9. Press the ACTION button twice to EXIT.
NOTE:
Some channels
with very weak signals may be
locked into memory. These must be deleted manually
using the MANUAL PROGRAM feature.
CLOCK SET
CLOCK (when set) will display On Screen at initial TURN ON, after
a channel change and when pressing RECALL button. It must be
set in order to operate the TIMER feature.
1. Press the ACTION button to display the MAIN MENU.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to
highlight the SET UP Icon.
3. Press the ACTION button to display the SET UP Menu.
4. Press CH UP or DOWN button to highlight CLOCK SET.
5. Press the ACTION button to set and display CLOCK SET Menu.
-SET
UP-
AIR/CABLE
AUTO
PROGRAM
MANUAL
PROGRAM
CLOCK
SET
PRESS
ACTION
TO
SET
-42-
-CLOCK
SET-
--:--
A.M.
PRESS
ACTION
TO
EXIT
7. Press the CH DOWN button to highlight minutes
position.
(CHANGE LOCATION)
Press the VOL LEFT or RIGHT button
to set minutes.
8. Press the ACTION button twice to EXIT once the proper time is
set (Including AM or PM).
-CLOCK
SET-
12:15
P.M.
PRESS
ACTION
TO
EXIT
NOTE: Pressing the ACTION button again will return you
back to the SET UP Icon.
Advertisement
Table of Contents
