Auto Program - Panasonic CT-27SF13U Operating Instructions Manual

Set Up Features
(cont.)
Located On Remote Control
Selects or Adjusts
Featu res when
Menu is Displayed
Auto Program
- The Auto Programming feature
allows you to place all channels with a video signal into
Channel Scan Memory. When you press the CHANNEL
UP/DOWN button, only those channels with a video
signal will be accessed.
NOTE: TV or Cable Tuning mode must be set properly
for your system.
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
button to highlight the Set Up Icon.
3. Press the ACTION button to display the Set Up
Menu.
Displays and Exits Menus
4. Press the CH UP/DOWN button to highlight AUTO
PROGRAM.
5. Press the VOL LEFT/RIGHT button to start Auto
Programming Scan. Channels will automatically ad-
vance until all channels have been scanned.
Note: Channel numbers with video signal present
will turn blue which indicates stored in
Channel Scan Memory.
6. Press ACTION button twice to exit menus.
NOTE: Some channels with very weak signals may be
locked into memory. These must be deleted
manually using the Manual Program feature.
Helpful Hints:
Blue channel numbe_
Scan Memory ..........
All channels are aVaiial_|e 6y di(e_t::a_S:_U_slng _the
numeric keypad (0 through 9 buttons),
After Auto Programming Scan has completed, upto 15
channels will be programmed into the FAVORITE
Channel Scan if space is available. Any original
channels that were programmed into FAV CHANNEL
will remain. (Refer to Favorite Channel Scan for
deleting unwanted channels.) : _ ._:.::::_ .....
- 36 -