Program Out (Prog Out); Digital "Iv - Set-Top Box (Dtv-Stb) Or Dvd Players - Panasonic CT-36HX42 Operating Instructions Manual

OPTIONAL EQUIPMENT CONNECTIONS
Program Out Connection (PROG OUT)
To usethe televisionaudio and videowith optionalequipment,connectthe PROG OUT and TO AUDIO AMP connections on the backof
the television,
CONNECTIONS ON BACK OF TV
"7
I
r QQQQ® '
AUDI O I
L°®®Q@® I
1--2 1--2--3 TO AUDIO
COMPONENTVIDEO INPUTS INPUT AMp I
-- -- JI- J
CABLES NOT SUPPLIED
h
MONWOR VCR
Procedure
1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals.
2. PROG OUT terminal display is the same as onscreen display.
3. See optional equipment manual for further instructions for recording and monitoring.
Digital TV - Set-Top Box (DTV-STB) or DVD Connection
This television is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner set-top-box (STB). In
order to view DTV programming, the STB must be connected to the component video inputs (Y, Pc, PR) of the television. A
DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.
This television also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the
image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated
with interlaced TV pictures.
Use this diagram to connect the Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player to the back of your "IV.
TERMINALS ON BACK OF DTV-STB OR DVD PLAYER
CABLES NOT SUPPLIED
COMPONENT INPUTTERMINALS ON BACK OF TV
7
Note: There are 2 sets of three video inputs, Y, PB, and Pc. Separate component color inputs provide luminance and color
separation. Use the L (left) and R (right) audio inputs.
10e