Table of Contents
Advertisement
*(FOR CT-35S31
)
Rear Panel Jacks
*DOLBY SURROUND
INT/EXT SPEAKER
O
VHF/UHF
'TO CONVERTER
, AUX
I
[_ INT.
iI
EXT.
EXT. SPEAKER
8
ONLY
iloi
©
®
®
Q
ANTENNA
INPUTS/OUTPUT
The "INPUT SELECT" Menu allows you to switch between two separate 75-ohm RF antenna inputs. Main (VHF/UH F) and Auxiliary (AUX).
The antenna output labeled "TO CONVERTER" allows the main (VHF/UHF) antenna connection to pass directly to a different source such
as pay-TV cable decoder.
Q
AUDIONIDEO
INPUTS 1
3 ON FRONT PANEL JACKS)
92
(OR
The TV/VIDEO button will step through each video source and the current antenna input each time it is pressed. Use the audio and video
inputs to connect external devices, such as VCRs, camcorders, laser disc players, video games, etc.
Q
OUTPUT
These jacks provide fixed audio and video signals which are used for recording.
(_) AUDIO TO HI-FI
These jacks provide variable audio output to a separate stereo system amplifier.
With this connection, the audio to the stereo can be
controlled by the television's Remote Control.
Q
REAR SPEAKER TERMINALS
These terminals are used to connect External Speakers, which are used for the SURROUND
SOUND feature.
The volume level is
controlled by the Remote Control Main VOLUME buttons and also by an independent rear volume feature found in the "AUDIO" Menu.
Use speakers with 8_ impedence only for Dolby External Speakers and switchable Internal/External Speakers.
Q
S-VIDEO
Input 1 provides S-VIDEO (Super Video) jacks for connecting equipment with S-VIDEO capability.
NOTE: *Model CT-35S21 has only one antenna input and one external speaker output connection with an internal/external switch.
CT-35S21 does not have the Dolby Surround feature or external connections.
NOTE: Dolby Surround Speaker connection is used for Dolby Surround. There is always a signal coming out from this connector.
INT/E.XT
Sgeaker
connection
is connected
in para_ltel',Nith
the iactor,_t
built-in
speaker.
By using
an optional
external
speaker.
you can select to use which speaker you want by switching the switch located at the rear panel to
(INT)
Internal
for
Factor,y
built-in speaker or (EXT) External for optiona! consumer
connected speakers. This On
Screendisplay is controlled by the
Universal Remote Control either "ON" or "OFF".
-46-
Advertisement
Table of Contents
