Advertisement
Vision Properties and Results
Reference
Overview
This reference manual explains all Vision Guide sequence, object, and calibration properties and
results, and all Vision Guide SPEL+ commands. For more information on how to use Vision Guide,
refer to the Vision Guide manual.
Vision Properties and Results Format Description
All Vision Guide properties and results are listed in the pages that follow. An explanation of the
headings for the property and result reference pages is given below:
Applies To
Description
Usage
Values
Remarks
See Also
Runtime only This is displayed under the property or result name when it applies. Runtime
Vision Guide 5.0 Reference (Ver.5.3) Rev.1
If the property or result is used with vision objects, then this section simply lists
the vision objects for which this property applies. (Ex. Blob, Correlation,
Polar...)
If the property or result is used with vision sequences then the words Vision
Sequence will appear in this section.
If the property or result is used with vision calibration then the words Vision
Calibration will appear in this section.
A simple description is given for each property or result. This section is
normally very short for simplicity.
The Usage Section describes how to access the property or result from the
+
SPEL
Language.
Describes the range of acceptable values which the property can be set to or
which the result will return. A default value is also shown for those properties
that have a default.
Explains more details than the Description Section. This section is normally
used to describe any caveats or special information that may apply to the
specific property or result. (It is highly recommended to read the Remarks
Section for each property prior to its usage.)
Gives a list of related properties, results, vision objects and other topics that may
prove useful to review.
only properties and results cannot be accessed from the Vision Guide GUI.
They can only be accessed from the SPEL+ language or from VB Guide.
1
Advertisement
