Advertisement
ModelOrgAutoCenter Property
Applies To
Vision Objects: Correlation, Geometric
Description
A model has a fixed reference point by which we describe its location in an image. This point is referred to
as the model's origin. The ModelOrgAutoCenter property causes the model origin to be placed at the
center of the model window automatically.
Usage
VGet Sequence.Object.ModelOrgAutoCenter, var
VSet Sequence.Object.ModelOrgAutoCenter, value
Sequence
Name of a sequence or string variable containing a sequence name.
Object
Name of an object or string variable containing an object name. The object must exist in the
specified sequence.
var
Boolean variable that will contain the value of the property.
value
Integer expression for the new value of the property.
Values
False
Do not cause the model origin to be automatically positioned
True
Automatically position the model origin at the center of the model window
Default:
True
Remarks
The model origin may lie anywhere within the region defined by the model window. The origin's
coordinates define the model origin relative to the model window's upper left corner, that is, relative to the
location of element [0][0] of the model window that defines the model.
The ModelOrgAutoCenter property causes the model origin to be positioned automatically in the center of
the model window whenever the model window is moved or resized.
If the ModelOrgAutoCenter property is set to True, then the ModelOrgX and ModelOrgY Properties cannot
NOTE
be used to reposition the model origin.
See Also
Anatomy of a Vision Object, Correlation Object, Geometric Object, ModelOrgX Property, ModelOrgY
Property, Object Tab
Vision Guide 5.0 Reference (Ver.5.3) Rev.1
ModelOrgAutoCenter Property
79
Advertisement
