Advertisement
EndPntObjResult Property
EndPntObjResult Property
Applies To
Vision Objects: Edge, Line
Description
Specifies which result to use from the EndPointObject.
Usage
VGet Sequence.Object.EndPntObjResult, var
VSet Sequence.Object.EndPntObjResult, value
Sequence
Name of a sequence or string variable containing a sequence name.
Object
Name of an object or string variable containing an object name. The object must exist in the
specified sequence.
var
Integer variable that will contain the value of the property.
value
Integer expression for the new value of the property.
Values
The value can range from 1 to the NumberToFind value for the EndPointObject. If the EndPointObject is
'Screen', then the value is always 1.
Remarks
EndPntObjResult enables you to attach several objects to the results of one EndPointObject. For example,
you could create a blob object with NumberToFind set to 4. Then you could attach a line object to each
one of the results by specifying the blob for the EndPointObject of each line and a different
EndPntObjResult for each line.
See Also
Edge Object, EndPointObject Property, Line Object, Object Tab, StartPntObjResult Property
46
Vision Guide 5.0 Reference (Ver.5.3) Rev.1
Advertisement
