Advertisement
Name Property
Name Property
Applies To
Vision Sequence
Vision Calibration
Vision Objects: All
Description
All vision objects, Sequences, and Calibrations must have a name. The name is then used to refer to the
individual vision object, Sequence or Calibration.
Usage
VGet Sequence.Object.Name, var
Sequence
Name of a sequence or string variable containing a sequence name.
Object
Name of an object or string variable containing an object name. The object must exist in the
specified sequence.
var
String variable that will contain the value of the property.
Remarks
Upon the creation of a new vision sequence, a dialog is displayed requesting a name for the new Sequence.
This name is then set as the Name property Value for the vision sequence. However, the user can modify
this name from the Sequence Tab.
Upon the creation of a new vision object such as a Blob, Correlation, etc., a name is automatically assigned
to the object. The names used are based on the object type with a numeric value appended to the end of the
name. For example, the following names might have been created for a specific vision sequence: Blob01,
Corr01, Blob02, Blob03, Corr02, Line01.
See Also
Blob Object, Correlation Object, Edge Object, Frame Object, Geometric Object, Line Object, Object Tab,
Point Object, Polar Object, Sequence Tab
88
Vision Guide 5.0 Reference (Ver.5.3) Rev.1
Advertisement
