Attaching Th E B Lade - Craftsman 135.17240 Owner's Manual

ATTACHING TH E B LADE
These saw_ are designed for use with both T or U-shank sabre saw blades.
..... I I I IIIII ,I i1,,11,,11,, ,i,1! ! '1 '1 ::::::: :
Z_ WARNING: To
prevent personal injury, ALWAYS disconnectthe
plug from power source BEFORE assembling parts, makJng adjustments
or changing blades. .....
Tool-Less Blade
Change Cover (Figure 3)
1. Lift too{-less blade change
cover up usi_ your index
and middle fingers°
2. Insert blade to full depth w_ the
teeth facing in thedirection
of the cut (See Fig_3).
3. Release the tooHess blade change
cover to secure the blade in place,,
Blade Storage
Compartment (Figure 4)
Your sabre saw comes equipped with
a blade storage compartment
(on the backside of the saw
See Fig, 4).
1. To open the door, pull the tab on
the door downward towards the
foot of the saw.
2. To close the door, lift door upward
towards the tool_Be sure _at
the door is dosed to prevent
blades from falling out.
g