Download  Print this page

Install Reverse Osmosis Filter Assembly; Install Storage Tank - Kenmore 625.385560 UltraFilter 650 Owner's Manual

Reverse osmosis system
Hide thumbs

Advertisement

INSTALL REVERSE OSMOSIS FILTER ASSEMBLY
The Reverse Osmosis Filter Assembly
can sit upright
or lay
on its side. When
planning
your installation,
you need to
allow
adequate
tubing
lengths to be able to access the
back of the Reverse Osmosis assembly
in order to change
the monitor
battery.
See Figure 11.
Figure 11
INSTALL STORAGE TANK
1. Apply
thread
sealing
tape to the threads
on the nipple
at the top of the tank (max. 2 wraps).
See Figure 12.
2. Locate the tubing connector.
Tighten the tubing
connec-
tor with a wrench onto the tank nipple 7-8 turns, being
careful
not to cross thread
or overtighten.
See Figure 12
3. Do not connect the tube at this time. This will occur
later in the assembly.
4. Place the storage
tank next to the Reverse Osmosis
Assembly.
The tank can be placed
upright
or on its
side.
Jr
Jj
//
/
/
//
tank
nipple
_/tubing
connector
ge tank
Figure 12
Questions?
Call The Kenmore
Water
Line 1-800-426-9345
or visit KenmoreWater.com
11

Advertisement

loading

  Also See for Kenmore 625.385560 UltraFilter 650

  Related Manuals for Kenmore 625.385560 UltraFilter 650

This manual is also suitable for:

Elite 625.385560Elite ultrafilter 650