Craftsman 24919 Operator's Manual page 9

Assembling The Bin Support Assembly
Locatethe uprightsupport bracketand the bin supportassembly.
Assembleit by followingthese steps:
1. Laythe bin supportassemblytopsidedownwith the mounting
bracketportionfacingupwards.
2. Insertthe notchedend of the verticalsupportbracketintothe bin
supportassembly,as in Fig. 4, and securewith a carriagebolt
(710-0276) and flangelock nut (712-04063)packedin with the
uprightsupportbracket.See Fig.5.
Figure 4
Figure 6
Installthe clevispin (711-0309A) f rom hardwarepack689-00097
intothe tractor'shitch and the assembly'shitch supportand
securewith a hairpinclip (710117) i n the top hole(closestto the
headof the pin). See Fig. 7.
\
/
Figure 5
Mount Assembly on Tractor
Installthe mountingassemblyon the tractoras follows:
1. Slide thebagger mountingassemblyalongthe top of the frame
rails, as in Fig.6, until theassemblyhooksunder the shoulder
bolts on the tractor.At this pointthe hitch supportholeon the
mountingassemblyand the hole on thetractor'shitch platewill
line up.
Figure 7
NOTE:Theclevispin can be feddownthroughthehitch supportand
securedunderneathwith the hairpinclip, as seenin Fig. 7,or it may be
easierto feedthe clevispin up throughthe hitch platehole and secure
with the hairpinclip on the topside.The latter methodmaybe preferred
sinceit can be easierto insertthe hairpinclip. Eitherwaywill work;the
decisionshouldbe basedon operatorpreference.
3. Tightenall of the hardwaresecuringthe hitchsupportat this time.
9