Table of Contents
Advertisement
F
(Rapidly
flashing
orange)
O = on, N = off, F = flashing
Operating problems
Problems you may have while using the scanner often involve the
operation of your software and computer. Operation problems
usually occur because of:
Incorrect setup of the interface (see Chapter 1).
Inappropriate selection of the scanner functions (see your
software manual).
Incorrect setup of your computer or software (see Chapter 1
in this guide or the software manual).
Incorrect operation of your software (see your software
manual).
4-10
Maintenance and Troubleshooting
Cause 1:
The cover of the optional Automatic
Document Feeder is open, or the release
lever is pressed and paper feeding unit is
slightly open.
What to do 1:
Make sure that the cover of optional Auto
Document Feeder is closed and/or push
the paper feeding unit down until it clicks
into place.
Cause 2:
No paper is loaded, or paper is jammed in
the Auto Document Feeder.
What to do 2:
Load paper in the Auto Document
Feeder, or turn the scanner off and
remove the jammed paper from the Auto
Document Feeder. See page 4-17 for
details.
Hide quick links:
Advertisement
Table of Contents
