Power-Off Sequence - Epson GT-7000 Photo User Manual

Power-off sequence

Keep the following in mind every time you turn off your
computer and SCSI devices.
When you are finished using your system, turn off your
computer first, then the scanner and other SCSI devices in
reverse order of the power-on sequence.
While using your computer, do not turn off any SCSI device
which has a terminator that is active (on).
Do not turn the scanner off and back on while using your
computer, otherwise the scanner may not work properly.
When the connection is complete, you need to install the scanner
software. See Chapter 1 of your scanner software manual.
Setting Up the Scanner
1
1-19