Watching Component Video Images; For Better Sound - Sharp XG-P20XE Operation Manual

Conference series lcd projector
Hide thumbs Also See for XG-P20XE:
Table of Contents

Advertisement

Watching Component Video Images

Connecting to a DVD video player, DTV* decoder and other
component video equipment using the 5 BNC Input
1
Connect each BNC connector of a component cable to the corresponding BNC INPUT 2 terminals on the
projector.
2
Connect the other end of the cable to the corresponding terminals on a DVD video player or DTV decoder.
3
To use the built-in audio system, connect one end of an audio cable (sold separately) to the AUDIO INPUT 2/3
terminal on the projector.
4
Connect the other end to the audio output terminal on the DVD video player or DTV decoder.
• BNC-RCA adaptors are included for use with RCA type cables and sources.
• A ø3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary.
When connecting this projector to a DVD video player or DTV decoder, select "Component" for "Signal Type" on the GUI
menu. (See page
.)
47
*DTV is the umbrella term used to describe the new digital television system in the United States.

For Better Sound

Connecting to an amplifier and other audio components
• By using external audio components, the volume can be amplified for better sound.
• The AUDIO OUTPUT terminal allow you to output audio to audio components from the selected AUDIO INPUT 1 to 5 terminals connected to
audiovisual equipment.
• For details on Variable Audio Output (VAO) and Fixed Audio Output (FAO), see page
• A ø3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary.
3
Audio cable
(ø3.5 mm stereo minijack/RCA cable,
sold separately)
1
Component cable (sold separately)
2
To analog component output terminals
Three BNC-RCA adaptors
Audio cable (sold separately)
4
To audio output terminals
CAUTION
• Always turn off the projector before connecting to video
equipment, in order to protect both the projector and the
equipment being connected.
To audio input terminals
CAUTION
• Always turn off the projector before connecting to audio
components, in order to protect both the projector and the
components being connected.
.
52
Example
DTV decoder
or
DVD video player
Amplifier
18

Advertisement

Table of Contents
loading

Table of Contents