Setting The Stacking Mode; Locking The Operation Buttons On The Projector - Sharp XG-P20XE Operation Manual

Conference series lcd projector

Hide thumbs Also See for XG-P20XE:

Table of Contents

Setting the Stacking Mode

You can double the brightness of an image by stacking two projectors and projecting same picture

simultaneously. To control two projectors, assign one as the master and one as the slave. The slave

projector will duplicate any operational settings made to the master projector. See page

procedure details.

• When the projector is set to "Master", button operation signals will be transmitted through RS-232C.

• When the projector is set to "Slave", operations follow the button operations sent from the "Master".

• When set to slave, all buttons on the projector along with ENTER, UNDO, POWER, LENS and MENU on the GyroRemote

can be used. The slave cannot operate the other buttons on GyroRemote.

• For details on intended purpose, see pages

This function can be used to lock the use of certain operation buttons on the projector. The user can still

operate the projector fully with the GyroRemote. See page

• To cancel the Keylock Level, perform the above procedure using the GyroRemote.

• See page

for details using the password function.

and

Selected item

Normal

Level A

Level B

for the procedure details.

Description

All operation buttons are functional.

Only Input/Volume/Mute functions on the

projector are available.

All operation buttons on the projector are

unavailable.

for the

Table of Contents