Table of Contents
Advertisement
When the reception mode is set to AUTO (press the RECEPTION
AUTO light comes on), your fax automatically answers all calls on
incoming documents.
MODE key until the
1
ring and receives
+ You can change the number of rings on which the fax answers incoming calls by
changing Option Setting 2 (see Chapter 6? "Optional Settings"). Any number from
"0" to "4" can be selected. (Select "0" to have your fax answer calls without ringing.)
+ If you pick up the handset before your fax answers, you can talk to the other party
and/or receive a document as described below in "Using MANUAL mode".
Note:
Documents
sent to your fax in Superfine
resolution
are printed in Fine resolution.
When the reception mode is set to MANUAL (press the RECEPTION MODE key until
the MANUAL light comes on), you must answer all calls (including fax transmissions)
using the fax's handset or an extension phone connected to the same line.
Receiving faxes on the FO-2600
When your fax rings, pick up the
handset.
l
If you hear a fax tone, wait until
RECEIVING appears in the display,
and then replace the handset.
l
If the other party first talks to you and
then wants to send a fax, press the
START key after speaking. Replace
the handset.
Note:
As a back-up
feature of MANUAL
mode. you can set the fax to automatically
answer
calls and receive documents
on any number of rings from 1 to 4. This is useful if you
are occasionally
unable to respond to an incoming
call personally.
The setting is made
with Option Setting 3. See Chapter 6, "Optional Settings".
BASIC OPERATIONS
3-11
Advertisement
Table of Contents
