Table of Contents
Advertisement
The laser printer
in your fax creates printed text and images by applying toner to the
page with a photoconductive drum. Follow the steps below to install or replace the
imaging cartridge (which contains the toner) and the drum cartridge.
Pull the release on the right side of
the operation panel forward, and open
the operation panel.
Grasp the top of the received
document guide and pull it so that it
rotates toward you. Lift the guide
straight up and out of the printing
compartment.
l
If you are installing the cartridges for
the first time, go to Step 5.
3
If you are replacing the cartridges,
grasp the finger hold on the imaging
cartridge handle (marked "PUSH")
and pull the handle out. Rehold the
handle, and pull the imaging cartridge
out of the compartment.
Caution! The fusing unit (the black unit
with ribs extending across the bottom
of the compartment) becomes very hot
during printing. Be careful not to touch
it.
If you are only replacing the drum
cartridge, place the imaging cartridge
on a piece of paper on a horizontal
surface. Make sure that the cartridge
lies fiat.
If you are only replacing the imaging
cartridge, go to Step 8.
1-2
INSTALLATION
Advertisement
Table of Contents
