Sharp F-2700M Operation Manual page 85

A variety of optional settings are available which you can use to fine-tune your fax to
better suit your needs. The settings are made by pressing the panel keys, and each
setting is described in the list below.
Step
~ Press these keys: Comments
I
!
FUNCTION
II (--
a
OPTION SETTING will appear in the display.
I
' @
or
Q
Move through the list ~f settings by pressing "#" [
2
to move forward, or "*" to move backward. The
settings will appear in the order listed below.
I
,
m
i~hen the desired setting appears in the display,
3
(Example) change it appropriately as described
below. ,
STOP
o —\
@'
Exit.
L '4
Setting 1:
FINE RESOLUTION PRIORITY
This sets the default resolution (the resolution used if a setting is not made with the
RESOLUTION key) for transmitting documents. Press "1" (YES) to set it to FINE, or "2" (NO) to
set it to STANDARD.
. Factory setting:
"2"
Setting
2: NUMBER OF RINGS AUTO RECEPTION
This sets the number of rings your fax allows before answering an incoming call in AUTO
receive mode. Enter a number from "O" to "4" (if "O" is entered your fax will answer without
ringing).
s Factory setiing: "1"
Setting
3: NUMBER OF RINGS MANUAL RECEPTION
This sets your fax to automatically answer a call after a certain number of rings when it is in
manual reception mode. Any number from "()" to "4" can be entered (enter "O" if you don't want
your fax to answer automatically).
Factory setting: "c)"
OPTIONAL SETTINGS
7-1