Sharp F-2700M Operation Manual page 45

.
SENDING DOCUMENTS
Using the SEARCH D/AL key
If you don't remember the Rapid Key or Speed Dial number in which you have stored
a particular fax number, you can search for the number by following the steps below.
Once you have found the number, you can dial it and transmit the loaded document
by simply pressing the START key.
1
S;;;:H
Press the SEARCH DIAL key.
'h
o
2
Enter the first letter of the stored
name by pressing the appropriate
number key (the key which
~@
corresponds to the required letter)
one or more times until the letter
appears in the display. If the name
begins with a special-character or
(Example:
"B")
number, press "1".
. If you don't remember the first letter,
go to Step 3 (you will scroll through the
list from the beginning).
. If a name wasn't stored for the number,
press "O". This will cause numbers, not
names, to appear when you scroll.
. To access voice numbers stored in
Rapid Keys which have no name,
press "O"twice (note that Speed Dial
numbers will also appear).
n
Press the "#" key or the "*" key to
" ~ 'r ~
scroll through the names (numbers if
you pressed "O"). Stop when the
desired name appears in the display.
If no names have been stored that
begin with the entered letter, you will
scroll from the next name, in
alphabetical order, in the list. If no
names/numbers have been stored at
all, NO DATA will appear.
BASIC OPERATIONS
4-9