Panasonic WV-SP302 Operating Instructions Manual page 95

Symptom
No image is displayed on
the "Live" page.
Images are displayed blurry.
The image is not being
refreshed.
No image is displayed (or
too dark).
Images are displayed
washed out.
Flicker appears on the
screen.
Cause/solution
• When "Every time I visit the webpage" is not selected
for "Check for newer versions of stored pages:" in the
"Temporary Internet Files" section, images sometimes
may not be displayed on the "Live" page.
In this case, do the following.
(1) Select "Internet Options..." from "Tools" on the
menu bar of Internet Explorer. The "Internet
Options" window will be displayed.
(2) When using Internet Explorer 7.0, Internet explorer
8.0
Click the [Settings] button in the "Browsing histo-
ry" section on the [General] tab, and then select
"Every time I visit the webpage" for "Check for
newer versions of stored pages:" in the
"Temporary Internet Files" section on the
"Temporary Internet Files and History Settings"
window.
(3) When using Internet Explorer 6.0
Click the [Settings...] button in the "Temporary
Internet files" section on the [General] tab, and
then select "Every visit to the page" for "Check for
newer versions of stored pages:" on the "Settings"
window.
• Is the focus adjusted correctly?
Check if the focus is adjusted correctly.
• Depending on the version of your browser, there might
be difficulties refreshing the picture, etc.
• Depending on the traffic of the network or the concen-
tration of access to the camera, there might be diffi-
culties displaying the camera picture. Request the
camera picture using the browser such as by pressing
the [F5] key, etc.
• Is the brightness setting set at an appropriate level?
Click the [Normal] button of [Brightness].
• Is the brightness setting set at an appropriate level?
Click the [Normal] button of [Brightness].
• When flicker occurs frequently, select "Indoor scene"
for "Light control mode".
Reference
pages
–
Installation
Guide
Installation
Guide
–
9
9
51
95