Panasonic WV-SP302 Operating Instructions Manual page 29

between the cases when "JPEG" is selected and
when "H.264" is selected for "Recording format".
• When "H.264" is selected for "Recording format",
the extension of the saved file will be ".mp4".
• "JPEG" is available only when "MPEG-4" is selected
for "Video encoding format" on the [JPEG/ H.264]
tab.
• When "H.264" is selected for "Recording format",
the settings of "H.264(2)" on the [JPEG/H.264] tab
of the "Camera" page are unavailable.
• When "H.264" is selected for "Recording format",
alarm images are saved in accordance with the set-
tings of "Pre alarm" and "Post alarm (Recording)
duration" on the [Alarm] tab of the "Alarm" page.
• When "H.264" is selected for "Recording format",
the name of the saved file will be given automatical-
ly.
■ Common
[Remaining capacity notification]
When the mail notification function or the Panasonic
alarm protocol function is used to provide notification of
the remaining capacity of the SD memory card, select a
level to be notified at from the following.
50%/20%/10%/5%/2%
Default: 50%
Note:
• Notification will be provided each time the remaining
capacity of the SD memory card reached the values
above.
For example, notification will be provided each time
the remaining capacity reaches 50%, 20%, 10%,
5% and 2% when "50%" is selected. Notification
may not always be made at the very moment when
the remaining capacity of the SD memory card has
reached each value.
[Save trigger]
Select a trigger to save images on the SD memory card
from the following.
FTP error: Saves images when images have failed to
transmit to the FTP server by the FTP periodic
image transmission function.
Alarm input: Saves images at an alarm occurrence.
Manual: Saves images manually.
Default: FTP error
Note:
• When "H.264" is selected for "Recording format",
"FTP error" is unavailable.
• Select "FTP error" when images are to be transmit-
ted to the FTP server at an alarm occurrence.
• When "Manual" is selected, the detected alarms will
not be saved on the alarm log list even if "On" is
selected for "Save logs" on the [Log] tab of the
"Basic" page (☞ page 37).
[Overwrite]
Determine whether or not to overwrite when the SD
memory card becomes full.
This setting is available only when "Manual" is selected
for "Save trigger".
On: Overwrites when the SD memory card becomes
full. (The oldest image is the first to be overwritten.)
Off: Stops saving images on the SD memory card when
the SD memory card becomes full.
Default: Off
Note:
• The overwrite setting will be as follows according to
the "Save trigger" setting.
FTP error: Will not be overwritten.
Alarm input: Will be overwritten.
Manual: Can be determined by selecting "On" or
"Off" for "Overwrite".
• It is necessary to configure this setting regardless of
the setting for "Recording format".
■ JPEG recording
This setting is available only when "JPEG" is selected
for "Recording format" of the SD memory card.
[File name]
Enter the file name used for the image to be saved on
the SD memory card. The file name will be as follows.
File name: ["Entered file name" + "Time and date (year/
month/day/hour/minute/second)"] + "Serial number"
Available number of characters: 1 - 8 characters
Note:
• When "H.264" is selected for "Recording format",
the name of the saved file will be given automatical-
ly.
29