Camera Operation Setting [Camera Setup]; Register A Scene File [Scene1/Scene2] - Panasonic WV-CP300 Operating Instructions Manual

Camera operation setting [CAMERA SETUP]

The following settings related to camera actions can be configured on the "CAMERA SETUP"
screen displayed from the top screen. Refer to page 5-6 for how to call up the screen.
The settings configured on the "CAMERA SETUP" screen will be saved as a scene file.

1 Register a scene file [SCENE1/SCENE2]

It is possible to register 2 patterns of scene file. When different settings are to be applied
between day and night, SCENE1 can be applied in the daytime and SCENE2 at night. Change
between the scene files can be made by shortcut operation. (
the default setting.
Screen when "SCENE1" is selected
**CAMERA SETUP**
SCENE1
ALC/ELC
SHUTTER
AGC
SENS UP
WHITE BAL
DNR
D&N(IR)
VMD
RET TOP END
Step 1
After confirming that "SCENE1" is selected, configure the settings of "ALC/ELC" through
"VMD". ( page 11-19)

To change the scene files, go to step 2.
Step 2
Move the cursor to "SCENE1" and use the [RIghT] or [LEfT] button to select "SCENE2".
→ The screen changes and displays "SCENE2".
Step 3
To configure the settings of "SCENE2" using the settings of "SCENE1", press the [SET] button
after moving the cursor to "COPY(SCENE1)".
→ The settings of "SCENE1" will be copied to "SCENE2".
Step 4
Edit the settings to be changed.
The number displayed at the right side of the title on
each setting screen indicates a scene file number.
Step 5
Move the cursor to "SCENE2" and press the [RIghT] or [LEfT]
button to select "SCENE1" to resume normal operation.
10
ALC
OFF
ON(HIGH)
OFF
ATW1
HIGH
AUTO1
OFF
page 27) "SCENE1" is set as

Screen when "SCENE2" is selected
**CAMERA SETUP**
SCENE2
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
D&N(IR) AUTO1
VMD OFF
COPY(SCENE1)
RET TOP END
**ALC CONT**(1)
BACK LIGHT COMP
BLC
ABS
MASK SET
LEVEL
RET TOP END
Scene file
number
OFF
ON
.I..... 0
- +